CAN ULC S104 15?

ULC Standards is pleased to announce the publication of the Fourth Edition of CAN/ULC-S104-15, Standard Method for Fire Tests of Door Assemblies. This Standard has been approved by the ULC Standards Committee on Fire Tests and has been published under the date of August 2015.

Can ULC S101 certified for Canada?

For Canada, Certification through UL provides the ‘cUL’ mark, while certification through ULC offers the ‘ULC’ mark—both are equally accepted in Canada by all provincial and territorial jurisdictions. Canadian model codes require fire-resistance designs meet CAN/ULC-S101.

What is CAN ULC S104?

CAN/ULC-S104 is the fire resistance test standard for doors and assemblies. CAN/ULC-S104 fire resistance test is similar to NFPA252, BS476-22 and other standards.

Can ULC S102 10?

The method, designated as CAN/ULC-S102-10, “Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies”, is designed to determine the relative surface burning characteristics of materials under specific test conditions.

Which organizations in Canada approve certify building materials?

In Canada, construction product approval is granted by the authority having jurisdiction (AHJ), usually a building official, or building designer (for example, an engineer or architect). The approval is typically made through a local building permit process.

Can ULC S102 vs ASTM E84?

Each ASTM E84 test produces FSI and SDI, while each CAN/ULC-S102 test produces Flame Spread Value (FSV) and Smoke Developed Value (SDV). Additionally, three or more tests performed on the same material for CAN/ULC-S102 produce averaged values to create Flame Spread Rating (FSR) and Smoke Developed Classification (SDC).

Can ULC S102 03?

METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS AND ASSEMBLIES. furnace to a thickness comparable to its recommended use. in the Standard Method of Test For Surface Burning Characteristics of Flooring, Floor Covering, and Miscellaneous Materials and Assemblies, CAN/ULC-S102.

Can ULC S102 flame spread ratings?

The CAN/ULC-S102 test, when conducted in triplicate, reports Flame Spread (FS) and Smoke Development (SD) values for the specific product or assembly evaluated. The flame propagation along the material’s exposed surface is visually observed and average Flame Spread value determined.