How do I fix error code F02?

Press the pause or cancel button on the Whirlpool washing machine to clear the F02 error code from the display, and try using it again. The error code is displayed when the washer takes more than eight minutes to drain, but may just be a glitch.

What does F2 mean on my washing machine?

: The “F2” fault code indicates it’s taking too long to drain the tub of water in order to reset the pressure switch. The problem is that the washer is not always able to drain water so that the water level switch can reset. This can happen if the wrong type of detergent is used or if you are using too much.

How do you clear a Maytag error code?

How do I clear the error code on my Maytag washer? To clear the error code on your washing machine, you have to press the pause/ cancel button twice and the power button once. If still, code is displayed, unplug the machine for a minute.

How do you unclog a Maytag washer?

1. Prepare the Machine. Pull Away from the Wall. With your supplies ready, it’s time to prep the washing machine.
2. Clear the Water. Bail Out the Basket. If the washer is full of water that isn’t draining away, you’ll need to bail it out.
3. Remove the Front Panel. Prop Up the Washer Front.
4. Start the Clog Hunt. Check the Pump Housing.

How do I fix APC F02 error?

BACK UPS pro 1500 error ode f02 after shutdown for the night,…

1. just power off your APC.
2. just remove the power cord from sector, keep battery.
3. press constantly power button until you hear the second beep signal.
4. Let the apc restart, it will mark f02 error again.
5. plug the power cord.
6. restart the APC.

What does F2 error mean?

F2 error code on a range pertains to the oven temperature sensor also known as the thermistor. F2 indicates thermistor has short-circuited therefore not operational. It does not necessarily imply the thermistor is at fault.

What does OB mean on Maytag washer?

Maytag ob – Off Balance Washer vibration can occur if one or more of the shock absorbers is broken or worn out.