How do you fireproof a house vent?
A gable end vent on an exterior wall with combustible siding material. If the siding ignites, flames could travel up the wall to the vent and under-eave area. This vertical/lateral flame spread to reach the vent can happen faster than the fire can burn through the siding and sheathing.
How do I Fireproof my attic vents?
Enclose under-eave and soffit vents or screen with metal mesh to prevent ember entry. Cover exterior attic vents with metal wire mesh no larger than 1/8 inch to prevent sparks from entering the home.
How do Brandguard vents work?
Brandguard Vents offers a unique patented solution that stops both embers and fire from entering your home. Brandguard ember-resistant vents are designed to stop embers from entering your home before the fire arrives. Wildfires generate ember storms which spread the fire ahead of the actual front of the fire.
What happens if you don’t vent a roof?
Unventilated or poorly ventilated attics don’t have an escape route for the heat that builds up. This buildup of heat can damage your shingles from the inside out. An evenly vented roof will allow the hot air to escape keeping your roof and attic cooler.
How do I protect my roof from fire?
Here are the most important tips for preventing roof fires and limiting the potential damage caused by a roof fire:
- Keeping Your Chimney Clean.
- Inspect Electrical Wiring / Leaky Roof.
- Ceiling Insulation.
- Choose a Fire Resistant Roofing Material.
- Metal Roofing.
- Concrete / Clay Roof Tiles.
- Fiberglass-Based Asphalt Shingles.
How do you install a Brandguard vent?
Brandguard Vents™ are installed like any traditional vent with the same footprint. Our line of retrofit fire Vents can be easily inserted over existing vents without any damage to the structure. They are held in place by applying appropriate screw fasteners. They can also be installed from inside the attic.
What are soffit vents?
Soffit vents are roof ventilation devices installed underneath the eaves of a roof that extend past the warm wall line. When properly combined with other roof ventilation devices, soffit vents allow fresh air to enter into an attic creating air flow.
How do Vulcan vents work?
Vulcan Vents are designed for fire protection. When a wildfire nears and the vent reaches critical temperature, the intumescent coating on the honeycomb matrix structure expands, creating an insulating barrier from fire and embers.
How do you install a Vulcan Vent?
Install the vent by inserting it into the opening. Nail into place with galvanized nails. With intumescent coating that closes at high temps and ember catching mesh, this fire-resistant design will protect your property from embers and flame intrusion into the attic.
Can brandguard vents be used in WUI areas?
Only products specifically designed and tested for fire/ember resistance can be used in WUI areas. Brandguard Vents’ comprehensive product range includes gable, soffit, undereave, foundation, ridge, and dormer vents. Our vents are manufactured with the highest-quality standards in durable galvanized steel or optional stainless steel and copper.
How do brandguard vents work?
Brandguard Vents offers a unique patented solution that stops both embers and fire from entering your home. Brandguard ember-resistant vents are designed to stop embers from entering your home before the fire arrives. Wildfires generate ember storms which spread the fire ahead of the actual front of the fire.
Can you have a vent on the underside of an eaves?
Ventilation openings on the underside of eaves are not permitted, unless a SFM approved vent is installed, or the attic is fire sprinklered. Vents of 1/16″ min. and 1/8″ max corrosion-resistant and noncombustible wire mesh or equivalent that are.more than 12 feet from a walking surface or grade below are allowed.
Are your vents fire-rated?
Both single-family and multifamily structures use open ventilation to cool attic and crawl spaces, so it is of paramount importance that those vents are fire-rated. Standard vents cannot stop embers. Only products specifically designed and tested for fire/ember resistance can be used in WUI areas.
