What are the Mini Cooper warning lights?

Mini dashboard warning lights – what they mean

• Green: the system is working correctly or is currently in use.
• Yellow: something is not working correctly – take extra care and check it out as soon as possible.
• Red: there is a serious, and potentially dangerous problem – stop driving as soon as it is safe to do so.

What does the engine symbol mean on a Mini Cooper?

When you see the check engine light illuminated in your dash, it means your Mini Cooper has detected a problem within its OBD system. If the Mini engine light is flashing yellow or red, it is in your best interest to take it to an Independent Service Center for diagnosis right away.

What does the mini service light mean?

This Mini service light means that your front brake pads are low and need changing – there will be a number under this symbol indicating the number of miles left before your brakes wear out.

What does red exclamation mark mean on mini dashboard?

Tire Pressure Monitor: This indicator light reports low tire pressure or a flat. It looks like a horseshoe with tire treads on the bottom and has an exclamation point in the center. This light will blink and then light up to signify a malfunction in the detection system.

What does the snowflake symbol mean on my Mini Cooper?

The Mini Cooper Outside Temperature Warning (OTW) indicator displays a warning snow flake symbol and signal sound when the temperature drops to approximately +37F/+3C, warning the driver that there is an increased risk of black ice forming on the roadways.

How do you check the check engine light on a Mini Cooper?

The only way to know why your Check Engine Light is on is to plug a scan tool into your vehicle’s OBD II diagnostic connector. The scan tool will then display the trouble code or codes that have been set. Most scan tools will display the trouble code and a one line description or definition of the code.

How do I know if my Mini Cooper needs servicing?

Your MINI’s control display has a vehicle status monitoring system under the “My MINI” menu. The “Vehicle Status” allows your MINI to communicate when there is a service need. It will let you know whether you need an oil change, a wiper fluid re-fill, a service on your brakes, or routine service maintenance.

How do you check the service light on a Mini Cooper?

First, turn the ignition key just before starting the engine. You should see your engine oil service light indicator is on. Next, press and hold the reset button (trip odometer button) until you see the menu come up (5-8 seconds).

What does triangle exclamation mark mean?

Usually the red triangle with an exclamation point means the message was not sent.

What do the warning lights on the Mini Cooper dashboard lights mean?

Let’s see what the most common warning lights on the Mini Cooper dashboard lights mean; 1-) It is a warning lights that indicates that the Front Fog Light is on. 2-) It is a warning lights that indicates that the Rear Fog Light is on.

How do I know if my Mini Cooper has a fault?

The fault can be diagnosed by using the iCarsoft BMM V1.0 Mini OBD Code Reader. Generally the fault will be because of an ABS sensor (also known as a Mini speed sensor) which will need to be replaced before the warning lights can be removed.

Do Mini Cooper service departments use OBD DTC P codes?

MINI/BMW service departments do not use OBD DTC “P” codes. BMW has their own propritory software and code reading system that generates code identifers formatted in HEX format. The secret HEX code decipher ring is not available to the public. Below is a list of known OBD II DTC codes generated by MINI Coopers.

What do the service indicator lights mean on a mini?

Understanding Mini Service Indicator Lights Newer Mini vehicles are equipped with an electronic, on-board, condition-based maintenance system that is linked to the dashboard and tells drivers when maintenance is required. The dashboard will display the miles until and/or the date when your next service is required.