What is F1 fault on ideal boiler?

The Ideal boiler F1 fault code relates to low water pressure in your central heating system. The pressure in your heating run and boiler comes from the amount of water currently in the system. If the system isn’t topped up with enough water, the pressure will be too low. But, systems can lose pressure over time.

Why is my ferroli boiler losing pressure?

Some Ferroli boilers will lockout if the pressure gets too low. Leaks are the most common cause of a pressure loss fault. Most of the time this will be leaking from radiator valves, or valves on towel rails. However, the leak can sometimes come from the auto air vent in the boiler, or expansion vessel.

What pressure should my ferroli boiler be?

between 1.0 and 2.0
Your boiler gauge should show that the boiler pressure is between 1.0 and 2.0. If the pressure drops below 1.0, then you’ll need to repressurise it.

What are the error codes on a Ferroli gas boiler?

FERROLI Gas Boiler Error Codes Error A01 – No flame signal is being received. There is no gas on the burner. Breakage of the gas valve.

Why choose Ferroli boilers?

More than 50 years, Ferroli produces climatic, heating and auxiliary equipment, including boilers. The equipment Ferroli is distinguished by reliability, safety, efficiency, modern design and low prices. The company carries out technical, service and advertising support.

What does the error F04 mean on my boiler?

Fault F04 – The operation of the flue gas thermostat (if this thermostat is activated, the boiler operation is excluded for 20 minutes). The contact of the flue gas thermostat is open. – Check the thermostat.

What are the different types of boiler faults?

Error A06 – Appears when the flame extinguishes 6 or more times in 10 minutes. Error A08 – Overheating of the heat exchanger OB. Fault F04 – The operation of the flue gas thermostat (if this thermostat is activated, the boiler operation is excluded for 20 minutes). The contact of the flue gas thermostat is open.