What is the difference between a gutter and an eaves trough?

Gutter has more meaning to it and can even be referred to as the gutter along the street. It can be referred to as just an area where something is stored and that a resource flows into. Eavestroughs are specifically built at the edge of a roof for collecting and re-directing rain water.

What is a gutter apron?

A Specialized Drip Edge designed to direct water into the gutter system. Gutter Apron is installed over the roof edge and hangs in the gutter.

What is an integral gutter?

Integral gutter = eaves trough gutter = built-in gutter: the gutter is built into the roof structure itself as a trough (see illustration below). Details about terne metal used on buildings are at TERNE METAL ROOFING.

What is soffit and fascia?

The soffit is part of the overhang where your roof meets your siding. The fascia is the attractive board along the side of the overhang and the roof that helps your roof appear finished. Your gutter sits atop the facia board. The fascia is also known as a “transition trim” between the home and the roofline.

How much does it cost to install gutter aprons?

Installing a gutter drip edge and gutter apron are cost-effective roofing materials ranging between $1 to $3 per linear foot.

What is drip edge?

Drip edge is metal flashing installed at the edges of the roof to keep water away from your fascia and from getting underneath your roofing components. If your roof doesn’t have drip edge, water gets behind your gutters and rots out both your fascia board and roof decking.

What is a Yankee gutter?

Yankee gutters are a drainage system inconspicuously built into the roof so that it isn’t visible along the roofline of the house. Dating back to the 18th century, Yankee gutters consist of a V- or U-shaped wooden trough lined with metal—usually copper or terne-coated steel—that directs water away from the house.

What is a roof trough?

noun. A piece of guttering set under the eaves of a roof to conduct rainwater; = “trough”; also in extended use.

How many downspouts do I need?

How Many Downspouts Do I Need? A general rule of thumb is one downspout per 20 feet of guttering, but more may be necessary depending on the local weather, the size of the drainage area and the design of the gutter system.

What is an eaves trough gutter?

Sketch courtesy of Carson Dunlop Associates. Eaves trough gutters appealed to architects because they may be hidden entirely from view, or when designed as a projecting eave (sketch at left), they form an architectural element. Originally eaves trough gutters were lined with terne metal, lead plated tin, or copper, and joints were usually soldered.

Should I re-line my eaves troughs?

The most common approaches to eaves trough gutter troubles are to repair and re-line the existing integral gutter, or to abandon it entirely. In our article above I describe a third approach suitable for historic restoration and where the existing integral gutter structure itself is in such bad condition that re-lining is not an option

How high should a gutter be on the eave?

RECOMMENDED GUTTER PITCH AND POSITION ON THE EAVE There are two factors that go into determining gutter position on the eave, the pitch of the gutter and the roof slope. Gutter should be pitched 1/16″ or greater per foot for proper drainage.

How do I know if my roof pitch is wrong?

Water overflowing over the gutters could be another sign that the pitch is incorrect. However there are a couple different things that could also cause your gutters to overflow. For example gutters that are clogged will have water overflowing near the downspout usually.