Where is the Hall sensor on LG washer?
The hall sensor (6501KW2002A) on the LG front load washing machines is located on the bottom back side of the stator.
What is a Hall sensor on a washing machine?
The hall sensor, also known as the rotor position sensor (RPS) is part of the automated system of your washing machine. Basically, the hall sensor keeps an eye on the washer’s motor to ensure it is working correctly and at the correct time during your washing cycle.
How do I fix IE error on LG washer?
Turn off the home’s hot and cold water supply taps/valve. Remove the water inlet hoses from the washer. Ensure to have a bucket to drain the remaining water from the hoses. Check the inlet filters on the inlet valves of the washer, inspect for any mineral deposits or other debris that may be clogging them.
What is a Hall sensor LG washer?
The hall sensor on LG washing machines monitors whether the the motor is turning or not. Checking to ensure the wire harness is secure on the hall sensor and testing the sensor can let you know whether the sensor needs to be replaced. With a repaired hall sensor, you’ll be back in action.
How do you test a hall sensor?
In order to test the sensors you need to apply +5V (using power supply or battery) between the red wire which is te “+” hall sensor wire and the black wire which is “-” hall sensor wire and check the voltage between each of the hall signal wires (white wires) to the red wire (with multimeter) – while you rotate the …
How do I fix error code 1E?
Samsung washing machine IE error – Possible solutions
- Do a hard power reset. You need to unplug your Samsung washing machine for about 5 minutes as this will normally reset most of the electronic glitches or any other issues with software that may be present.
- Ensure proper wire connection.
- Replace the pressure switch.
How do I clear the IE code on my LG dishwasher?
Unplug the appliance and turn off the water tap or water valve. Unscrew the water supply hose. Remove the seal and plastic filter with a pair of small pliers or scissors….LG Dishwasher – IE error
- Check the water pressure.
- Check the water tap or valve.
- Check the water supply hose.
- Check the water supply.
