Who makes Homelite Leaf Blowers?

Techtronic Industries
John Deere acquired the brand in 1994. Techtronic Industries acquired Homelite from John Deere in 2001. Homelite has shifted its production primarily to consumer level lawn and garden equipment and light duty chainsaws.

Why can’t I pull the cord on my leaf blower?

Sometimes, when your starter rope will not retract into your leaf blower, it can be because it is jammed between the pulley and the housing, or it is wrapped around the hub. In this case, you will often be able to fix the symptom by simply opening the machine and untangling or removing the rope from where it is stuck.

Where is the model number on a Homelite blower?

Model and serial numbers are located on a label on the left side of the red motor housing. The blower vacuums are red and black. “Homelite BlowerVac 2 Speed Powerful 220 MPH” is printed on the side of the motor housing and on the black plastic blower tube.

Is Homelite a good brand?

The Homelite brand has a reputation for delivering affordable, functional tools with average homeowners in mind. This is on full display with the Homelite UT43122B electric chainsaw. It’s a good choice for occasional use and can handle pretty much any cutting job that’s likely to pop up around the yard.

Should I replace my leaf blower’s starting cord?

As your leaf blower ages, the starting cord may become damaged. Fraying or snapping of the cord is common; however, there is no need to replace the entire starting recoil. Replacing just the rope can get you back to work. This procedure can be done in a short amount of time with only a few tools and does not require extensive skill.

How do I replace the rope on my blower?

Replacing just the rope can get you back to work. This procedure can be done in a short amount of time with only a few tools and does not require extensive skill. Place blower on its side, with the starting recoil facing up. Remove the four hex screws that mount the starting recoil to the blower housing. Turn over starting recoil.

How do you remove the recoil from a lawn mower blower?

Place blower on its side, with the starting recoil facing up. Remove the four hex screws that mount the starting recoil to the blower housing. Turn over starting recoil. Remove the screw that holds the rope housing pulley in place. Carefully remove the pulley.