Why is my Sharp Aquos power light blinking?
The lights on a Sharp TV are meant to be clues about the status of the unit. The blinking of either the power light or the OPC (Optical Picture Control) light is an error message or fault code. It may be a setting on the television, it might be a problem with the firmware or a mechanical issue that requires service.
How do you fix a blinking green light on a Sharp TV?
Unplug set, press and hold (on set) volume-down and channel-down and hold them while pluging in set. Will come on with “k” on screen, or will crash again if backlight bad. If it stays on, use your remote and arrow right then look for “fact init” and any other reset and turn them on.
What does it mean when the power and OPC light flashing?
A flashing OPC LED is an alert that something is wrong with your Aquos television. If it’s still flashing, power cycle your TV: unplug it at the electrical socket on your surge protector or wall, wait two minutes and then plug it in again.
Why is the power light blinking on my TV?
A Green or White light may blink while the TV is powering on. This is normal and will stop once the TV comes on. If the light continues to blink and the TV does not come on or if the TV comes on and then turns off and the process starts over again, unplug the TV for 3 minutes then plug it back in and try again.
Why is my TV blinking green?
Green screen flashes generally indicate a HDCP (Digital Content Protection) handshaking issue, or a HDMI hot plug detect issue between that particular source device and display.
What does OPC mean on Sharp Aquos TV?
Optical Picture Control
When the TV is set to “On Display”, the Optical Picture Control (OPC) senses the surrounding light and automatically adjusts the backlight brightness; this will also display the green leaves on the LCD display.
Why does my Sharp TV not turn on?
Hard Reset One common issue with Sharp TVs is that they tend to malfunction if there is a power outage or power surge. Step 2: Unplug the TV from the power. Step 3: Press and hold the power button on the TV for 30 seconds. Step 4: Wait another 10 minutes with the TV unplugged.
